Parts Bench › Parts › 2000 Cadillac Escalade › Lower Ball Joint
2000 Cadillac Escalade Lower Ball Joint
Ball joints let the wheel move up and down and steer. A worn ball joint can fail and is a safety issue.
Compare lower ball joint for your Escalade in the appSigns it may need replacing
- Clunking over bumps
- Wandering steering or uneven tire wear
- Visible play when the wheel is lifted and rocked
At a glance
| Part | Lower Ball Joint Suspension › Control Arms & Joints |
|---|---|
| Typical life | Often 70,000 to 150,000 miles. |
| DIY difficulty | Advanced Often needs a ball joint press, and an alignment afterward. |
Lifespans and difficulty are general. They vary with the engine, trim, driving and climate, and your owner's manual and a qualified mechanic should have the final say.
Before you buy
Some cars use a joint that is part of the control arm, so the whole arm is replaced. Check which type yours is.
Confirm the part fits your exact 2000 Cadillac Escalade by checking your VIN, engine size and trim with the seller. The Escalade was sold with different options across the 2000 model year, and a part that fits one build may not fit another.
Where to buy a 2000 Cadillac Escalade lower ball joint
These searches are set up for your vehicle and the part.
Links to eBay and other stores are affiliate links. We may earn a commission if you buy, at no extra cost to you. Parts Bench is not a store and does not sell parts. Always confirm fitment with the seller before you buy.