Parts Bench › Parts › 2006 Saab 9-3 › Brake Master Cylinder
2006 Saab 9-3 Brake Master Cylinder
The master cylinder turns pedal movement into hydraulic pressure for all four brakes.
Compare brake master cylinder for your 9-3 in the appSigns it may need replacing
- A spongy pedal that slowly sinks to the floor
- Brake fluid level dropping with no visible leak
- A brake warning light
At a glance
| Part | Brake Master Cylinder Brakes › Hydraulics & Boosters |
|---|---|
| Typical life | Often lasts the life of the vehicle, but seals can wear after many years. |
| DIY difficulty | Advanced The system must be bled afterward, and brakes are a safety system. |
| Related service | Brake fluid flush: Every 30,000 miles or 2 years Brake fluid absorbs moisture over time. |
Lifespans and difficulty are general. They vary with the engine, trim, driving and climate, and your owner's manual and a qualified mechanic should have the final say.
Before you buy
Match the bore size and brake type (ABS or not). If you are not confident bleeding brakes, have a shop do it.
Confirm the part fits your exact 2006 Saab 9-3 by checking your VIN, engine size and trim with the seller. The 9-3 was sold with different options across the 2006 model year, and a part that fits one build may not fit another.
Where to buy a 2006 Saab 9-3 brake master cylinder
These searches are set up for your vehicle and the part.
Links to eBay and other stores are affiliate links. We may earn a commission if you buy, at no extra cost to you. Parts Bench is not a store and does not sell parts. Always confirm fitment with the seller before you buy.