Parts Bench › Parts › 2012 Ford Escape › Head Gasket
2012 Ford Escape Head Gasket
The head gasket seals the cylinder head to the engine block, keeping coolant, oil and combustion pressure apart.
Compare head gasket for your Escape in the appSigns it may need replacing
- White smoke from the exhaust, or coolant loss with no visible leak
- Milky oil, or bubbles in the coolant
- Overheating
At a glance
| Part | Head Gasket Engine › Cylinder Head & Block |
|---|---|
| Typical life | Often lasts the life of the engine unless the engine overheats. |
| DIY difficulty | Advanced A major engine repair that needs careful measuring and torque steps. |
Lifespans and difficulty are general. They vary with the engine, trim, driving and climate, and your owner's manual and a qualified mechanic should have the final say.
Before you buy
Have the cylinder head checked for flatness. Use new head bolts if your engine uses one-use bolts, and fix the cause of the overheating first.
Confirm the part fits your exact 2012 Ford Escape by checking your VIN, engine size and trim with the seller. The Escape was sold with different options across the 2012 model year, and a part that fits one build may not fit another.
Where to buy a 2012 Ford Escape head gasket
These searches are set up for your vehicle and the part.
Links to eBay and other stores are affiliate links. We may earn a commission if you buy, at no extra cost to you. Parts Bench is not a store and does not sell parts. Always confirm fitment with the seller before you buy.